info needed
Started by dieseltechstudent09, Sep 26 2009 02:02 PM
28 replies to this topic
#3 Guest_Mike0743_*Posted 27 September 2009 - 04:06 PM
the rear suspension is good on the 4th generation camaros but the strut style front suspension isnt exactly ideal for street stock racing. i would look for a good metric chassis car or a camaro. what type of rear suspension do you want coil spring or leaf spring? #4Posted 28 September 2009 - 09:39 AM
dont know about rear susp... probably a coil ....theres alot of people tat would float to either but probably a coil....im just tryin to turn my 94 camaro into a dirt bomber for next year to get some experience....just trying tofind out how much trouble its gonna be to gut it and have someone weld in a roll cage
#5 Guest_Mike0743_*Posted 28 September 2009 - 12:21 PM
i would honestly stay away from the 94 camaro if all possible. by your username i am assuming that you are a UNOH student. I would honestly go out to some of the local junkyards and see if they have any monte carlo's, regals, cutlass, chevelles, malibus, or even a 70-81 camaro if possible. Spend the extra couple hundred dollars to get a car that people are using or have been using. It helps for finding parts and comparing setups. Because this way you can compare notes to other drivers and crews. #7 Guest_Mike0743_*Posted 28 September 2009 - 03:40 PM
no problem if you need any help just send me a message on here. I graduate from unoh back in 2008 and am working on my engineering degree now so if i can help ya along the way i will. #8Posted 28 September 2009 - 04:15 PM
[size=7]motor builder!!! if i can find one cheap enough . and an experienced roll cage fab...thoes 2 things and im sure ill be fine... yea i do go to unoh gonna try to get on the team but if not...im gonna do it myself i guess
Edited by dieseltechstudent09, 28 September 2009 - 04:18 PM. #9Posted 28 September 2009 - 05:05 PM
I don't know if I would even build a stock. The only place right now you can run is Lima and Eldora. Getting to be less at Eldora. It may be better to buy a mod frame and go from there, motor prices these days is about the same accept for a 4bbl and aluminum heads, etc. Some of the stocks can probably out run some of the mods even with a 2bbl and race gas, and street tires.
#12Posted 29 September 2009 - 01:38 PM
yea ive already inquired about them...the 21 is over priced and the 30 r is just ...not the right price either so when i find one thats right ill get it....you have to remember im just starting so im not trying to pay tons of cash and watch it go down the drain because of inexperience. rather buy the right priced to get started than go bankrupt before i get it on the track. because of unknown expenses
#13Posted 29 September 2009 - 05:32 PM
Street Stock
another street stock yet another street stock These are what I would call beginner stock chassis that you may want to keep an eye on and most of the work is already done for you.
Danny Kelly
#14Posted 30 September 2009 - 03:12 AM
No offense but, I don't think you know what you're getting into. Neither of those cars are over priced, both are a fraction of what they would cost to build. If you want into a race ready car for under $4500, it's going to be TOUGH. #15Posted 30 September 2009 - 07:05 AM
For a first time racer its gonna cost you a little bit of money just to try and keep out of their way. The best way for you to go being a first time guy giving it a try. Why dont you look into racing a truck. Thats the cheaper way to go you can pick one up pretty cheap.
skip
#16Posted 30 September 2009 - 11:11 AM
i understand dirtracer that they might be worth it in what it cost to build...but on the other hand those cars are not worth it to me. there have been a few cars that i have seen that are just as good for 3000 but wasnt the right make.. i am not a ford fan. toooooooo many problems. anyways on the truck situation . even though stocks have only a couple places to race around here the trucks are not that much better! and the trucks that a few people have shown me puts the price of them bout 500 to 1000 under a budget of a stock....but thats only the costs i have seen not saying there arent any cheaper. ill just wait a few months, see if i can make it on the stock or modified team at unoh and go from there.
#17Posted 30 September 2009 - 07:20 PM
What are you looking to spend? I actually had less than 1,000 race ready in my first one....you do get what you pay for, and that was 13 years ago. #18Posted 01 October 2009 - 08:50 AM
Really diesel, these folks are not trying to talk you out of it. Just be real about it. If you can get one already built w/or wo the motor you are gonna save money, and a lot of work. The cars that were mentioned above have the good stuff and are competitive. The 21 will go toe to toe with most cars. Believe them when they say it ain't cheap. race gas alone is 6.50 to 8.00 a gallon. Depending how you buy it. A decent street tire is 100.00 or more. So if you can get it for 4500, you better get it. He's got lots of extra stuff too.
Doc
#19Posted 01 October 2009 - 12:27 PM
I believe you guys. I understand it isnt cheap. thats my whole point on tryin to buy one for the right price that is good enough to at least run with a group instead of last place, but at the same time not worry about dumping tons of money into it. but trust me i understand im not gonna jump into this thing not knowing the cost
#20Posted 01 October 2009 - 12:35 PM
I definitely get your point, and understand where you're at. $4500 for a competitive car in this class is a bargain though. Unless you have a bunch of parts already, fabrication tools and skills at your disposal, any less than that would be very hard to do anything but battle at the back of the pack. I've tried getting away doing it cheaper, it doesn't work in that class. I finally spent 5 figures on an engine, but decided if I am spending that kind of dough, it's going in a sprint car. Definitely try to get on with a team to see the in's and out's, and pay attention to what's being spent. Reply to this topic1 user(s) are reading this topic0 members, 1 guests, 0 anonymous users |
|