3 replies to this topic

[bd3d]

For Sale, complete 23 degree top end, Number 10 Brodix Heads, (These heads are complete and have not been on an engine since being pressure tested and resurfaced), (Valve Springs have about 1/2 season on them and were checked, the Valves have been reseated and Installed heights checked and shimmed for correct seat pressure, max lift .700),Includes the following items, Victor Jr intake Maniifold, Complete set of Roller Rockers (1.5 and 1.6 ratios), Rocker Arms Studs, Guide Plates, Complete set of Roller lifters, complete set of Push Rods, head studs with nuts and washers and Cam - This setup was our backup top end but we just went to an 18 degree setup so don't need this stuff anymore. It's complete and ready to bolt on - $1,500.00 takes everything.

[TheLegend]

For Sale, complete 23 degree top end, Number 10 Brodix Heads, (These heads are complete and have not been on an engine since being pressure tested and resurfaced), (Valve Springs have about 1/2 season on them and were checked, the Valves have been reseated and Installed heights checked and shimmed for correct seat pressure, max lift .700),Includes the following items, Victor Jr intake Maniifold, Complete set of Roller Rockers (1.5 and 1.6 ratios), Rocker Arms Studs, Guide Plates, Complete set of Roller lifters, complete set of Push Rods, head studs with nuts and washers and Cam - This setup was our backup top end but we just went to an 18 degree setup so don't need this stuff anymore. It's complete and ready to bolt on - $1,500.00 takes everything.

Ill give a case of bud light or 20 dollars cash

[bd3d]

Ill give a case of bud light or 20 dollars cash

I had no doubt you would!

[TheLegend]

Ill bump that up to 25 dollars of it helps you out ..