6 replies to this topic

[DavyLee2]

Aluminum Metric Chassy Hood from 80's Cutlass or Regal ( can be made to fit any metric !) $100 Total weight 25 POUNDS! Aluminum Brake drums ! from Metric Gm rearend ( fits monte / regal / cutlas and some impala s): Three Uncut $10 each 2 Cut and were being used $15 each All 5 for $50 These weigh 8 Lbs each .. stock are about 13 lbs ! Thats about 40% LESS Rotating Mass at the tip of your axles ! 4.56 Richmond gears ( a must at Pittsburgh and worked good at Tri City ) Ring and pinion with 2 seasons on them $50 80s Exaust Manifolds whit N Stamping ( closest thing to factory header ) $80 Afco Racing shocks .. One was for RF and one for LF $25 each These Parts Win Races ! Located near Pitt Airport

Attached Files

•  100_1921.JPG   769.68KB   74 downloads
•  100_1922.JPG   860.72KB   55 downloads
•  100_1920.JPG   769.76KB   43 downloads
•  100_1917.JPG   726.13KB   47 downloads

Edited by DavyLee2, 17 February 2013 - 09:26 AM.

[TheLegend]

Aluminum Metric Chassy Hood from 80's Cutlass or Regal ( can be made to fit any metric !) $100 Total weight 25 POUNDS!

Aluminum Brake drums ! from Metric Gm rearend ( fits monte / regal / cutlas and some impala s):
Three Uncut $10 each 2 Cut and were being used $15 each All 5 for $50 These weigh 8 Lbs each .. stock are about 13 lbs ! Thats about 40% LESS Rotating Mass at the tip of your axles !

4.56 Richmond gears ( a must at Pittsburgh and worked good at Tri City ) Ring and pinion with 2 seasons on them $50

80s Exaust Manifolds whit N Stamping ( closest thing to factory header ) $80

Afco Racing shocks .. One was for RF and one for LF $25 each

These Parts Win Races !

I thought your Bloomquist like skills win races not illegal parts ??? WTF !!!

[DavyLee2]

I thought your Bloomquist like skills win races not illegal parts ??? WTF !!!

Its Not that you dont know ALLOT ! . Its that what you know is wrong ,
Bloomquist is a great car builder !
Bloomquist is a great driver !
It takes both .. These Parts are OEM !
Your Half wrong again !

See Pic of Hood in other Classified add

[keller11]

Its Not that you dont know ALLOT ! . Its that what you know is wrong ,
Bloomquist is a great car builder !
Bloomquist is a great driver !
It takes both .. These Parts are OEM !
Your Half wrong again !

See Pic of Hood in other Classified add

Davey give me a call 724 972 6359

[DavyLee2]

Aluminum Metric Chassy Hood from 80's Cutlass or Regal ( can be made to fit any metric !) $100 Total weight 25 POUNDS!

Aluminum Brake drums ! from Metric Gm rearend ( fits monte / regal / cutlas and some impala s):
Three Uncut $10 each 2 Cut and were being used $15 each All 5 for $50 These weigh 8 Lbs each .. stock are about 13 lbs ! Thats about 40% LESS Rotating Mass at the tip of your axles !

4.56 Richmond gears ( a must at Pittsburgh and worked good at Tri City ) Ring and pinion with 2 seasons on them $50

80s Exaust Manifolds whit N Stamping ( closest thing to factory header ) $80

Afco Racing shocks .. One was for RF and one for LF $25 each

These Parts Win Races !

Located near Pitt Airport

Pending Motordrome decision .. these might be the best headers money can buy .. " N " Stamp is factory headers!

[DavyLee2]

Aluminum Metric Chassy Hood from 80's Cutlass or Regal ( can be made to fit any metric !) $100 Total weight 25 POUNDS!

Aluminum Brake drums ! from Metric Gm rearend ( fits monte / regal / cutlas and some impala s):
Three Uncut $10 each 2 Cut and were being used $15 each All 5 for $50 These weigh 8 Lbs each .. stock are about 13 lbs ! Thats about 40% LESS Rotating Mass at the tip of your axles !

4.56 Richmond gears ( a must at Pittsburgh and worked good at Tri City ) Ring and pinion with 2 seasons on them $50

80s Exaust Manifolds whit N Stamping ( closest thing to factory header ) $80

Afco Racing shocks .. One was for RF and one for LF $25 each

These Parts Win Races !

Located near Pitt Airport

The Hood is Sold
shocks are sold
New prices for other parts :

Brake Drums $25 for All

4.456 Gears $40

Exaust manifolds $75

[dirtracer81]

davey give me a call bob 412-264-4511