Installing a new MD3 nose piece with the lower valance, never installed a lower valance before but it looks like you have to trim the lip off the bottom edge of the nose piece to allow the valance to fit up against the back side of the nose piece......Anyone who has done one of these and would like to give any advice as to how to get the best results on installing the Valance, it would be appreciated.
MD3 Nose and Valance
Started by Pops, Mar 07 2015 07:03 AM
3 replies to this topic
#1
Posted 07 March 2015 - 07:03 AM
#2
Posted 07 March 2015 - 08:19 AM
Yes you have to cut that lip off. Highly
Recommend that you use the thick plastic nose
Supports bolted to the bumper then bolt through all 3 layers in the front
Recommend that you use the thick plastic nose
Supports bolted to the bumper then bolt through all 3 layers in the front
#3
Posted 07 March 2015 - 07:04 PM
Thanks for the info.
#4
Posted 07 March 2015 - 07:21 PM
If you have the old style (last years) MD3 nose, you have to trim the bottom edge like you said. The new style MD3 nose for this year already has that lip removed. The new style also goes together much nicer where the elephant ears attach as the dimensions on the body lines are more consistent on nose and ears.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
