9 replies to this topic

[Racer17L]

I'm looking to sell the heads off my emod since I had to buy steel ones to race pure stocks. Brodix 23 degree angle plug STS T1 CNC ported heads. I can get the stamp number off the head if someone is interested. $1,000 OBO. Vince Laboon 412-396-9138 racer17v@yahoo.com

Attached Files

•  Picture_017.jpg   86.76KB   206 downloads
•  Picture_018.jpg   65.06KB   121 downloads

[whiteboy55]

I'm looking to sell the heads off my emod since I had to buy steel ones to race pure stocks. Brodix 23 degree angle plug STS T1 CNC ported heads. I can get the stamp number off the head if someone is interested. $1,000 OBO.

Vince Laboon
412-396-9138
racer17v@yahoo.com

just paint them black, they wouldn't know the difference!

[bd3d]

just paint them black, they wouldn't know the difference!

What numebrs are on the heads? Do you know the runner sizes or any of the flow numbers?

[Racer17L]

What numebrs are on the heads? Do you know the runner sizes or any of the flow numbers?

I'll get you the head numbers this weekend. Are you the gentleman who called me on Monday? If so, sorry I've been moving.

[bd3d]

I'll get you the head numbers this weekend. Are you the gentleman who called me on Monday? If so, sorry I've been moving.

Yep

[Racer17L]

Ok good, I'll get down the shop and let you know. Thanks.

[Racer17L]

Not sure which numbers you need but here is what was on the head- hopefully this is right? STS215 T1 JJ 545 CNC then to the right it has N2259

[Racer17L]

TRACK 1 - STS T1 215 Cylinder Heads The STS T1 215 cylinder head is the beginning of Brodix fully CNC ported Track 1 series. CNC porting ensures maximum consistency between each intake and exhaust port. STS T1 215 builds off of 215cc intake runners, 68cc CNC machined combustion chambers, 2.080'' intake/ 1.600'' exhaust valves. Brodix built the STS T1 215 with a standard valve centerline. The 215cc intake port flows over 304cfm at 700'' lift. The exhaust port flows over 226cfm at 700'' lift. Intake Ports: 215cc Combustion Chamber: 64cc Valve Size: 2.080'' Intake / 1.600'' Exhaust (4.965'' o.a.l., 11/32'' stem diameter) Valve Spring Specs: Mechanical Flat/Roller Cam 1.550'' diameter 240 lbs./closed 550 lbs./open 1.950'' installed height .700'' max lift Valve Centerline: Standard, Use Standard SB-Chevy Rocker Arms Rocker Studs: 7/16'' Pushrod Guide Plates: 5/16'' Ports & Combustion Chamber: Fully CNC-Machined Ports and Combustion Chambers

Edited by Racer17L, 20 September 2012 - 09:27 AM.

[Racer17L]

Bump. Anyone need a good set of aluminum heads make me an offer. I'd like to get these out of the garage. Thanks. Vince

[Racer17L]

Another bump.  $700 OBO.  Thanks.

 

Vince