Find content
Not Telling
Whats this I hear that 4-5 Stock cars went thru inspection Friday night at lima with swedge tubes for inner and outter tie rods? I looked up the rules on lima's web page.
#11. Suspension
a. Weight jacks are optional. Front suspension and steering must be unaltered O.E and in stock location, and must be replaceable by stock part from same type suspension.
If this is true Y are they not Disqualified ?
Just like the bar cars running there now same rules in the same section!
#11. Suspension d.
Rear suspension must be stock O.E design. No added lift arms, shocks or springs. Aftermarket pan hard bars are optional, but must be solid. Upper torque link/biscuit bar (24"max length) optional, but mounting point on car must be within 24 inches of axel centerline. No Macpherson struts or coilovers eliminators. No swing arm suspension. Rear suspension area must remain open and unobstructed for inspection.
What part of a swedge tube/endexing birdcage rear suspension fits under STOCK O.E DESIGN.
Where does it say Bar cars are ok to run with indexing bird cages? Looking on the photo section on Andersons car the left rear tire is almost out of the entire body of the car, Douglas is almost as bad.
Watching last week them pullig the left front tire almost all the way down the back stretch is wrong. Lima needs to put a stop to these late model/E-Mod wan't to be Stock cars. The roofs on some of the cars even look like mod roofs, or late model's. for that fact.
Topics I've Started
Swedge tubes and bar cars?
11 June 2013 - 03:05 PM
Whats this I hear that 4-5 Stock cars went thru inspection Friday night at lima with swedge tubes for inner and outter tie rods? I looked up the rules on lima's web page.
#11. Suspension
a. Weight jacks are optional. Front suspension and steering must be unaltered O.E and in stock location, and must be replaceable by stock part from same type suspension.
If this is true Y are they not Disqualified ?
Just like the bar cars running there now same rules in the same section!
#11. Suspension d.
Rear suspension must be stock O.E design. No added lift arms, shocks or springs. Aftermarket pan hard bars are optional, but must be solid. Upper torque link/biscuit bar (24"max length) optional, but mounting point on car must be within 24 inches of axel centerline. No Macpherson struts or coilovers eliminators. No swing arm suspension. Rear suspension area must remain open and unobstructed for inspection.
What part of a swedge tube/endexing birdcage rear suspension fits under STOCK O.E DESIGN.
Where does it say Bar cars are ok to run with indexing bird cages? Looking on the photo section on Andersons car the left rear tire is almost out of the entire body of the car, Douglas is almost as bad.
Watching last week them pullig the left front tire almost all the way down the back stretch is wrong. Lima needs to put a stop to these late model/E-Mod wan't to be Stock cars. The roofs on some of the cars even look like mod roofs, or late model's. for that fact.
